Sunday, December 4, 2011

Ever After: Danielle's 'Breathe' Gown

Ok, as far as labor and materials go, this has been my most intense costume to date.  There was so much research behind it, and I must have watched the Masqued Ball scene of  Ever After about 100 times.  I will probably edit and re-edit this post, but I thought I'd at least get it started.
I've loved this gown for a long time, and like many of my costumes, I simply have to work up the nerve to get it started.  Up until now, it seemed way out of my league.  There is soooo much detail to consider, plus the fact that you're working with a lot of delicate materials.  Then, there are those wings. Here is the basic run-down of how I created this costume.  I hope someone finds it useful!

The Pattern:  Simplicity #8735.  It is out of print now, but you may be able to find it on ebay.  This pattern served primarily as a base for the bodice.  The rest was heavily modified.  I didn't even use the sleeve pattern. 

The Fabrics:  For the underskirt and underlayer of the bodice, I went with the good old casa satin in white from Joanne fabrics.  Like the rest of the fabric, I dyed this satin in pearl gray (very lightly) then gave it a tea bath.  For the overskirt, I was actually able to find a gorgeous metallic crinkle silk in silver at GoldenSilks.com.  It looks very much like the fabric in the film!  For the alternating panels, I found some regular white chiffon that I dyed as I did my satin.  Not totally accurate, but I could not find the appropriate silk for those panels, and even if I did, I probably would have blown my budget.  I used dyed chantilly lace on the bodice, as it had the scallopped edge I needed.



The Trimmings:  This is where it gets interesting.  In the film version, there is a beautiful floral bullion trim edging out the overskirt and it is also found on the bodice.  Try as I did, I could not find bullion trim that even came close.  I assume that trim may have been made specifically for that gown and is not offered up to the masses.  I found some florall bridal trim that sufficed (after trying about 4 or 5 other trim samples), but it was wayyy to wide, so I trimmed it up, dyed it, then beaded it with some seed beads.  You'll find a variety of trims and laces on the bodice and sleeves as well, including metallic silver and gold ribbon, pearl trim, floral lace trim, and a beatiful lotus-shaped applique.  I found an applique on ebay that's pretty close, then I made the beaded appliques that span outward from it. 


Detail Work:  I'd say I spent about 4 months on the skirt embellishment...the chiffon panels were embroidered by machine--it took FOREVER.  I did it in sections--first, I'd cut a sheet of iron-on stabilizer and iron it to the chiffon.  Second, I drew the pattern to be embroidered onto the stabilizer.  Third, I used the tiniest of zig-zag stitches in silver metallic thread to embroider the pattern.  It was a slow, grueling process that took about 1.5 hours per section.  There were 5-7 sections per panel (the panels in back are longer).  After a panel was complete, I'd sew on the little pearls.  I used the tiny plastic pearls you buy by the bagful at Joanne's.  I ended up having to buy a second bag.  Honestly, I lost count of how many pearls had to be sewn on by hand (close to 2000?).  I reallylike the way it turned out, though.  When fabric can't be bought, sometimes you make it yourself!

The Sleeves:  The sleeves were made by layering sections of silk, tulle, more silk, more tulle.  The crinkle silk is at the top (connected to the bodice).  I was able to modify some lace to create the 'arched' look in the movie lace...the laces and trims were layerd down the arm.  It's hard to describe, so I'll let the pics do most of the talking for now.  Needless to say, the sleeves were made entirely by hand...everything was way to delicate, or there was the hand beading to consider...so definitely no machines!  The final section was made with 4 layers of tulle, edged out at the wrist with delicate bridal lace and the remainder of the pearl trim.  I cut flower shapes from the leftover chantilly lace and appliqued them to the tulle.  Rhinestones were arranged at the wrist...you can see them on the film version!



The Shoes:  I shopped around for some shoes that were similar to the ones worn in the film and found some beautiful Indian bridals, but I had a budget to consider.  Luckily, I found a pair of clear Sam and Libby heels at a friend's garage sale for 50 cents.  There was only the clear band across the top of the foot and a really nice lucite heel whose shape is close to that of the film shoe.  So I set out the create the uppers with layers of duck canvas and satin.  I beaded the uppers and attached them to the shoe with E-6000 glue.  Lots of it.  I trimmed out the ugly edges with a tiny silver metallic rope trim which looked close to the screen worn version.  For the heel, I attached 2 filgrees and several Swarovski rhinestones.  They aren't 100% accurate, but they are pretty comfy and very sparkly!





The Wings: I started by drawing a template onto paper, then using some all-purpose wire I bought at Lowe's, cut and bent the wire into shape (not easily done...sore fingers!).  Copper tape held the pieces together until they were spot-welded together.  After welding, they were sprayed with silver chrome paint, and the outer edge painted gold.  I used light silver tulle to fill it all in...sewn to the wire with metallic silver thread.  That was a total exercise in patience.  When transporting them, I had to be very careful...the netting would rip or the thread would snap if you just looked at it funny. 
I wanted them to look close to the film version, so I made an undercorset to act as a sort of harness to keep the wings steady.  It was a basic corset pattern, but heavily boned in the back around channels that had been sewn in...the wing attachments would slide down into the channels...they stayed pretty well and weren't a huge pain!



Pictures:



I've only worn this gown one time-for the DragonCon Costume Contest.  I received lots of nice feedback on its construction and detail, which was great.  Brian was so sweet to act as my 'wingman,' carrying my wings to and fro and making sure they were secure.  Hopefully, I'll be able to wear it again, even though it is tough walking in any crowded areas with those wings!
I could not have made this dress without the awesome reference pics on Maggie's site EverAfterCostumes.com.  Many thanks!!

12 comments:

  1. wow it looks so amazing. u did an awesome job. hope to see more of ur future costumes to come! :)

    ReplyDelete
  2. It's absolutely amazing ! I can't imagine how much time you spent on this dress o__o

    Claire (thestrangeflower.canalblog.com)

    ReplyDelete
  3. Having had the pleasure of seeing this costume up close at Dragon*con 2011, it is awesome to see some of the construction pics! Amazing recreation of a beautiful costume! Kudos to you!! :D

    ReplyDelete
  4. It looks amazing !
    I dont really like the wings, but the dress itself looks so nice! Just like it is in the movie

    ReplyDelete
  5. Oh, it's sooo beautiful! I love this dress!

    ReplyDelete
  6. Do you ever make your dresses for other people? Selling, I mean.

    ReplyDelete
  7. I love all of this! And this is amazingly helpful seeing as I am in the process of buying in order to create this as well. :) I was curious as to where you got the filigree work?

    ReplyDelete
  8. Hello! And thank you:)
    I believe I bought the filigree (for the heels) at hobby lobby. The 'Traditions' brand makes them, and they are actually square shaped and I just cut them on the diagonal, and topped them with the rhinestones.
    I hope that helps!

    ReplyDelete
  9. I want those shoes and dress been looking every wear x

    ReplyDelete
  10. I want those shoes and dress been looking every wear x

    ReplyDelete
  11. Do you do commissions? I am getting married October 2017, and I would love to have this dress

    ReplyDelete
  12. Hi Ashlee. I know it's been years since you made this beautiful gown, but can you recall what all fabrics were used on the Lacey insert which supports the motif and beaded leaves and how they were sewn together beneath the V bodice?

    ReplyDelete